Just finished 7-21-10

Faux Black Binding on Silver Metalflake !

$449.00 plus shipping

Here is one of my most popular custom painted body designs. Dual Faux bindings on sparkle silver metalflake. Buck O would be proud. And this paint really come alive under the lights ! This paint looks a mile deep with it's multiple coats of clear Poly topcoat and really sparkles! It is water sanded flat and polished to an super high gloss finish that is mirror smooth and looks like polished glass. Pictures cannot do this paint job justice. Because of it's brilliance Metalflake is very hard to photograph. Please excuse the flash any subtle distortions in the pictures- these are just reflections. Neck and hardware in photo's are not included. This paint job is like the most custom chopper you have ever seen and is guaranteed to turn heads.

This is a NEW custom painted Alder body patterned from a vintage '69. The neck pocket is a standard 2-3/16 wide at the base so Tele replacement type necks and standard necks that are 2-3/16"at the heel should work fine. All routes, bridge and wiring holes are drilled. Buyer must drill holes for control plate (and clear pickguard if you decide to use one). String ferrule holes are 5/16". Weight is 4 lbs 10 oz. This BODY is MADE IN THE USA by ME and painted in the USA by Me. ( Sorry I keep repeating myself but people continue to ask me where I get the bodies ... I MAKE THEM ! ).

It is very time consuming to make and paint a body like this. There are nearly 20 hours making the body and painting it. Once I finished making the body I apply a sealer coat which is sanded once dry. Then I start with a silver base followed with layers of metalflake over the entire body. Several coats are applied then a thick clear coat over the top because alot will be sanded off to get it perfectly flat. After sanding the clear coat flat, the Faux binding meticulously masked off and then painted on. Once cured it is completely sanded and then given the final Polyester clear coat. Once it has cured it is completely sanded flat starting with a 600 grit wet sandpaper and and then progressively sanded with finer grits until I finally reace the stage of a 2500 grit wet sanding. After this it goes through several stages of polishing until it looks a mile deep and shines like polished glass.

I am Tony De Lacugo, I make DeLacugo guitars and basses. I have sold over 150 metalflake paint jobs and custom painted metalflake bodies on ebay in the last few years and every buyer has been very impressed with the product. Only top custom painters are capable of a paint job like this, so expect to pay big bucks where ever you go. A complete "Custom Shop" guitar with a finish like this can bring $3000.00 or more. You could save THOUSANDS by starting with this body and then adding your neck and hardware.